Tag Archives: Tim McCreight

Ode to a bench pin

My bench pin is no more. Reduced to a mere stump, it has come to the end of its life and has to be replaced. Still, I find it hard to let go of it. I look at the scars left by the tools and I reminisce about the projects I have lived with these past years.

old bench pin

Old worn out bench pin

A bench pin is a small wedge-shaped wooden extension of the workbench and, as humble as it may look, it is a very important piece of equipment. In fact, as Michael David Sturlin notes in his excellent article “Bench Pin Basics” (in Art Jewelry Magazine. September 2012), for us goldsmiths, “… the bench pin is the center of our world”. And I would add that it might be the most personal piece of equipment as well. Let’s explore how one can develop a better relationship with it.

Workbench with bench pin (centre) and cutting board (left).

Workbench with bench pin (centre) and cutting board (left).

To help you work more comfortably, the bench pin should be placed at the right height. When you sit at your bench, facing the bench pin, your back should be straight and you should be able to keep your head up, with the pin at mid-chest level. And since we are on the subject of ergonomics, you should always be connected to your bench pin while you work – remember, it is the centre of your world. This means that your workpiece, your hand or your tool should always be in contact with the pin, whether you are sawing, drilling, forming or filing. This will ensure you work efficiently and safely. To quote M.D. Sturlin again, no “air jewelry” please! For that reason, the bench pin must be firmly secured to the bench. Pins come in different styles, but regardless, if your bench pin is wiggly, you won’t be able to work with maximum accuracy and control.

You are going to work with your bench pin for several years, so make it your own, and make it work for you. Don’t be afraid to carve and cut into it to modify it. Here is a diagram of the modifications I made to mine, but feel free to customize your own bench pin according to your needs (if you are left-handed, you might want to reverse the diagram).

Modified pin - side

Modified pin – side

Modified pin - front

Modified pin – front

modified pin with diagram

1Depressions: carve with round burrs; great for holding rings when filing inside the shank.

2Vertical grooves: clamp a board on the side of the pin, and drill holes of various diameters perpendicular to the top; good for filing the top of tubing sections.

3Nub: cut with a saw, and then file; good for holding a coil of wire while sawing the jump rings (push the coil onto the nub to stiffen it and secure it). Can also be used to cut a ring shank when sizing a ring – for that, slide ring over nub, and saw safely.

4Notch: saw first, and then file, carve one or several in different sizes. Great for forming (brace object in the notch).

5Slanted edge: useful for filing or when using a ring clamp (when setting a stone on a ring, for example).

6Tapered groove: for filing evenly the tapered end of a piece of round wire.

In addition to these, you could make a V-shaped cut for sawing. I prefer to use a separate cutting board for that, but it can be done on your bench pin as well. In that case, make sure you install the pin with the flat side up. For more suggestions, I recommend Tim McCreight and Charles Lewton-Brain, metalsmiths, teachers, and best-selling authors of way too many technical books to mention here, and of course, the Ganoksin Project (search in “bench tips”).

The beauty of the bench pin is in its simplicity; you can personalize it to your needs. Start with a few basic modifications, and then customize it further for your next project. It’s easy. Simply use a file, a saw or a burr and shape it as you like. As Rick said in Casablanca, “Louie, I think this is the beginning of a beautiful friendship.”

Advertisements